Description
TS-WX1220AH
DUAL 12 INCH 600W RMS TS-WX1220AH HIGH OUTPUT POWERED SUB.
About the Pioneer TS-WX130DA
Easy-to-fit Enclosure
Pioneer’s TS-WX130DA powered subwoofer brings you deep, soulful bass in a truly compact enclosure. At only 2-3/4” tall, this enclosure is designed to fit into those tight spots in your vehicle such as under a front seat, behind a truck seat, or inside a storage compartment. It’s an excellent solution that allows you to pump up the bass while saving space.
Aluminum cone subwoofer with adjustable sound
The TS-WX1220AH 8″ x 5-1/4″ woofer feeding 50 watts RMS by the durable, built-in amplifier can give you a fantastic bass response. An aluminum cone offers additional rigidity to overcome distortion as the surrounding urethane tracks the cone. The wired remote system enables you to configure the gain, low pass filters, and phase configurations, plus you can select from two bottom configurations to change the dynamic range and sensitivity of the speaker. In an easy-to-do kit, this powerful subwoofer provides strong bass response and adjustment.
Product highlights:
- compact powered subwoofer
- 8″ x 5-1/4″ sub with aluminum cone
- built-in amplifier: 50 watts RMS (160 watts peak)
- wired remote for control over:
- gain
- low-pass filter
- selectable phase control (0°, 180°)
- Bass Mode settings:
- Deep: 20 to 200 Hz frequency response, 95 dB sensitivity
- Dynamic: 40 to 160 Hz frequency response, 100 dB sensitivity
- dimensions: 11-1/8″W x 2-3/4″H x 8″D
- warranty: 1 year
- MFR # TS-WX130DA
What’s in the box:
- Powered subwoofer
- 10.5″ RCA input harness (4-pin Molex plug/2 female RCAs)
- Power harness with 16.5′ power and remote turn-on leads and 6′ ground wire (3-pin Molex plug)
- 10A ATO fuse in fuse holder (installed on power wire)
- Wired Digital Bass Control with attached 16.25′ cable (RJ-45 plug)
- 2 Mounting feet
- Cable clamp
- Self-tapping screws (M5 x 18mm)
- Machine screws (M5 x 14mm)
- Machine screws (M3 x 8mm)
- Adhesive-backed hook-and-loop pad
- Instruction Manual
- Warranty sheet
Boundary Loaded Bass-reflex Slot Port Design
The slot port is positioned on the bottom edge of the bass-reflex enclosure which maximizes the subwoofer system output SPL by boundary loading the combined output of the slot port and the subwoofer diaphragms. Powerful, deep, and accurate bass response capable of reproducing a wide range of music genres such as hip hop, rock, pop, and country.
Powerful Amplified Subwoofer
Built with high bandwidth, high output and low distortion 1,200W Max. (600W Nom.) Power Class D amplifier mated to high sensitivity woofers specifically optimized for use in small, sealed enclosures.
Flexible sound adjustment
User-adjustable TS-WX1220AH controls include an LPF, phase control, and variable bass boost (0 to +12 dB, 40Hz to 100Hz) providing enhanced control. To expand system flexibility and user control, input gain can be adjusted using the included wired remote bass control knob or via the input gain control mounted on the enclosure side panel.
KEY FEATURES
|
|
Powered | Sensitivity (1W/1m) | 92 dB |
|
Hz
|
20 Hz to 2.9 Hz | CTA-2031 Compliant | Yes |
| Warranty | 1 Year | Continuous Power Handling (RMS) – Watts | 1000 Watts |
| Maximum Peak Power Handling – Watts | 3000 Watts | Speaker Grill | Fully Covered Steel Mesh Grille |
| Bass Boost Frequency | 40Hz to 100Hz | Bass Boost Level | 0 to +12 dB |
| Built-In Amp | Yes | Amp Max Power Output | 1200 Watts |
| Amp DIN | 600 Watts | Input Level (@ Gain Max) RCA | 100 mV+100 mV/22 kOhm |
| Input Level (@ Gain Max) Speaker Line | 2 V+2 V/5 kOhm | Power Source | Dc 14.4 V |
| Amp Max Current Consumption | 50 A | Amp Grounding | Negative |
BUILD
| Shape | Round | Size | 12″ |
| Cone Material | Cellulose fiber | Drive Cone Material | PP |
| Urethane | Surround Type | Rolled | |
| Basket Material | Stamped Metal | Magnet Material | Ferrite |
| Magnet Weight | 42.3 oz | Voice Coil Type | Single Voice |
| Voice Coil Bobbin | Kapton | Copper | |
| Damper | Aramid | Gasket | ABS |
Reviews
There are no reviews yet.