Description
Kenwood Excelon XR-1701P
Excelon Series Kenwood Excelon XR-1701P 6-1/2″ component speaker system
About the Kenwood Excelon XR-1701P
Excelon, through and through
Your key point for strong sound, performance is the Kenwood Excelon badge. The speaker system part Kenwood XR-1701P provides their products. These speakers use high-quality modules and designs to play audio files in high definition to improve an amplifier signal. This means for you a lifespan without distortion in hearing.
Premium components
The 6-1/2 “Woofer cone in glass fiber has a complete and warm sound. For a specially built environment that guarantees stamina and playing during play. 1-3/16 The “A rough dome tweeter enhances the artist’s purpose by adding striking detail to the music. If you like high-quality audio, these tweeters replicate frequencies of up to 40,000 Hz, including the details and strong images.
Kenwood also offers a range of assembly challenges with flexible mounting gear.
Bring on the power
These outstanding speakers accommodate up to 100 watts of RMS. When powered by a nice amp, you can optimize their efficiency. And you can amplify woofers and tweeters independently by means of external crossings.
Installation note: Installing the tweeters at the factory locations requires a pair of universal backstraps.
XR speakers are specifically built to produce an immersive listening experience of every detail and nuance of high-resolution audio.
RICH AND IMMERSIVE HIGH-RESOLUTION AUDIO
High-resolution audio is a recording of high quality exceeding CD level. High-resolution audio records and exhibits all your favorite songs in great detail. Take a rich and high-quality sonic experience across ultra-high and low frequencies.
Smooth waveforms
Loss of smoothness
Fine waveforms
*The material with this mark complies with the Japan Audio Society’s high-resolution audio quality. This logo is used by the Japan Audio Society under license.
Kenwood Excelon XR-1701P GLASS FIBER CONE
The cone of glass fiber mixes high-force with lightweight materials. The speaker will play all the sounds from striking bass notes to soft tones.
WOOFER CAP WITH CIRCLE RIB Kenwood Excelon XR-1701P
The rib of the circle allows increased stabilization of the woofer to ensure that the bass is loud and strong.
Kenwood Excelon XR-1701P SURROUND ROLL SHAPE
The surround roll form’s asymmetrical thickness offers more focused bass.
1-3/16” LARGE TWEETER DESIGNED FOR HIGH RESOLUTION
Tweeters 1-3/16″ (30 mm) have a wider area than many tweeters. This makes direct vocal sound reproduction through the extremely high-frequency spectrum. Flush and surface assembly options are included.
A wide 1-3/16″ (30mm) titanium hard dome is the ultimate for high-frequency performance with its compound curvature diaphragm.
NEW BI-AMP CONNECTION
The XR-1701P’s include bi-ampable crossover network box. With precision you can drive the tweeter and woofer from the XR401-4 independently. A high-reliability poly switch and resistor are also used to optimize the network box.
FLUSH OR ANGLE MOUNT TWEETER
Hardware for mounting to allow both angled and flush mounting options is offered.
WOOFER MULTI-BRACKET
A bracket is used in order to facilitate the assembly of a number of types of cars.
General Features
| Peak Input Power | 300W |
|---|---|
| Rated Input Power | 100W |
| Impedance | 3Ω |
| Woofer Features | 6-1/2 inch Glass Fiber Cone |
| Tweeter Features | 1-3/16inch Hard Dome |
| Specifications | |
| Sensitivity | 87 dB/ W / m |
| Frequency Response | 43Hz-40kHz (-10dB) |
| Cutout Diameter | 5-1/2 inch |
| Mounting Depth | 2-5/16 inch |
These exceptional speakers will handle up to 100 watts RMS, so you’ll maximize their performance when you power them with a nice amp. And the included external crossovers let you amplify the woofers and tweeters separately for an even stronger sound.
Custom Brackets: Kenwood XR-1701P Woofing devices are converted into factory substitutes for various Ford, GM, Hyundai, Toyota, and VW vehicles using included brackets. The brackets are for many uses, marked for trimming.
Crossover: Each crossover has screw terminal inputs and outputs that will accommodate bare wire or spade connectors up to 0.315″ wide. (Speaker wire is not included with the system.) The output level of the tweeters is adjustable; choose 0 dB or -3 dB. The crossovers also have bi-amp inputs, one input for the tweeter and one for the woofer. When bi-amping the speakers, the input jumpers need to be removed. Using four amplifier channels to bi-amp the speakers typically improves the dynamic range and presents an easier load for the amp(s) to drive. The crossover slope is 12 dB/octave, high-pass, and low-pass.
Reviews
There are no reviews yet.