Description
Kenwood KAC-M3004
Compact Kenwood KAC-M3004 4-channel car amplifier — 50 watts RMS x 4
Many of today’s Powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. KENWOOD’s compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.
Let Kenwood KAC-M3004 Power your music wherever you go
The lightweight 4-channel Kenwood KAC-M3004 amplifier can pump up the music with 50 watts of RMS per channel in your car. This is sufficient to hear it all plainly over the trail, road, or waterway noise as you walk along. This little powerhouse fits almost everywhere, even a yacht, motorcycle, or ATV storage compartment, so you can put great sonority into any vehicle you want. A couple of subs installation? This amp can be sent to 2-channel mode and 150 watts can be sent to any subwoofer.
Weather-resistant protection for music on the go
Conformal covering covers the internal circuits from water and debris, but even under the harshest circumstances, the show will continue. The output terminals in the speaker feature plastic-covered connectors to offer additional security.
Kenwood KAC-M3004 High-level inputs ease installation
If you use RCA cables from an after-market receiver or speaker wires from a factory radio, the Kenwood KAC-M3004 accepts a signal from almost any source. The amplifier senses the signal and activates it when you use the speaker-level inputs, so you do not need to run a remote turn-on to your car stereo.
| Title | Compact 4 Channel Digital Amplifier | |
|---|---|---|
| Amplifier Type | Class D | |
| CEA-2006 Primary Ratings | Power Output | 50 Watts RMS x 4 at 4 Ohms and ≤1%THD+N |
| Signal-to-Noise Ratio | 76dBA (Reference: 1Watt into 4Ohms) | |
| Maximum Power Output | 600W | |
| Specifications | Signal to Noise Ratio | 89dB (Reference: Rated Power into 4Ohms at 14.4V) |
| Frequency Response | 20Hz-20kHz (+0dB, -1dB) | |
| Input Impedance | 10k ohm | |
| Speaker Impedance | 4Ω (2Ω to 8Ω allowable) | |
| Bridged connection | 4Ω to 8Ω allowable | |
| Audio Section | Low-Pass Filter | Built-in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct) |
| High-Pass Filter | Built-in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct) | |
| Filter Selector 1 | LPF-OFF-HPF | |
| RCA Input Sensitivity | 0.2 V – 5.0 V | |
| Speaker Level Input Sensitivity | 4.0 V – 12.0 V | |
| Terminals | Battery & Ground | Screw Type Terminal Block (Ni) (M4) |
| Speaker Output | MOLEX Connector with AWG16 200mm Wire | |
| Line In | RCA (Ni) | |
| General | Dimensions(WxHxD) | ‘6-1/2 X ‘1-3/4 X ‘3-7/8 inch |
| Weight(kg) | – | |
| Operating Voltage | 14.4V（11-16V allowable） | |
| Current Consumption | 22 A | |
| Key Features | CEA-2006 Compliant Class D 2 Ohms Load Capability Speaker Level Input Signal Sensing Turn-on Power MOS-FET Switching Power Supply Extruded Aluminum Heat Sink Design |
|
| Others | Triangle Indicator | |
Reviews
There are no reviews yet.